CO2 Easy Box System for Euthanasia
Post-experimental Rodents Euthanasia device
Our new CO2 unit simplifies the euthanasia procedure. Particularly the prevention of stress in the animals.
The Easy Box module is directly placed to the standarized Tecniplast cage box of type II or type III.
The procedure of CO2 euthanasia is prepared less stressful for the animal and will be perfomed according
to the selected cage volume. These requirements correspond to the 2010/63 / EU standards, which
regulates the policy for experiments with the handling of the animal.
The Easy Box module is directly placed to the standarized Tecniplast cage box of type II or type III.
The procedure of CO2 euthanasia is prepared less stressful for the animal and will be perfomed according
to the selected cage volume. These requirements correspond to the 2010/63 / EU standards, which
regulates the policy for experiments with the handling of the animal.
|
|
At the end of the cycle, the evacuation of the CO2 gas will be extracted automatically from the outlet port
of the CO2 Easy Box to a Soda canister or a wall mount CO2 inlet evacuation system.
of the CO2 Easy Box to a Soda canister or a wall mount CO2 inlet evacuation system.
The usage is very easy!
How does the system work?
The controller has an LCD screen and a simple keypad for selecting the settings and storage of multiple
programs. The animals and the cage volume can be set respectively. A single button now starts the cycle.
If a problem accurs during the procedure, the program stops the operation automatically.
Two LED lights indicate each module status:
- Prepare the cage on a table and remove the grill from the container.
Press the "Start" button
The CO2 gas flows into the chamber and is automatically controlled in the filling phase
(CO2 feed pressure of 1 - 5 Bar 15-70 PSI)
The "Process" button will light up and the process is after approximately
11-15 minutes completed.
The green button "End" indicates the completion of the operation.
- When the CO2 is evacuated at the end oft he cycle, you will hear a sound signal, which indicates
the end of the process. Thereafter, the cage can be emptied.
The device is then ready for the next gas cycle.
How does the system work?
The controller has an LCD screen and a simple keypad for selecting the settings and storage of multiple
programs. The animals and the cage volume can be set respectively. A single button now starts the cycle.
If a problem accurs during the procedure, the program stops the operation automatically.
Two LED lights indicate each module status:
- Prepare the cage on a table and remove the grill from the container.
Press the "Start" button
The CO2 gas flows into the chamber and is automatically controlled in the filling phase
(CO2 feed pressure of 1 - 5 Bar 15-70 PSI)
The "Process" button will light up and the process is after approximately
11-15 minutes completed.
The green button "End" indicates the completion of the operation.
- When the CO2 is evacuated at the end oft he cycle, you will hear a sound signal, which indicates
the end of the process. Thereafter, the cage can be emptied.
The device is then ready for the next gas cycle.
ORDER NUMBERS :
PS-0660 set With Easy Box module CE, external power supply 220 - 240 V / 1.0 A 50-60 Hz device Input 24 VDC, power cord, connecting hose CO2
There are two Tecniplast Box adapters are available:
PS-0661 Box Adapter with seals, Type III cage, size 425 x 266 x 185 mm
PS-0662 Box Adapter with seals, type II cage, size 267 x 207 x 140 mm
(Please specify this when ordering)
PS-0663 Connecting hose CO2 Easy Box module to the Absorber
PS-0664 CO2 soda canister (single use)
PS-0665 CO2 soda canister container with holder capacity is approx. 5 liters
PS-0667 Cage tecniplast type lll
TECHNICAL DATA
Weight: 2,5 kg (depending on the Box adapter type ll or type lll)
Overall dimensions: 275 x 175 x 130 mm
Electrical power input: 24 VDC - 1A
CO2 input: 1 - 5 Bar (15 - 70 PSI)
Extraction: Diameter 22 standard hose
Weight: 2,5 kg (depending on the Box adapter type ll or type lll)
Overall dimensions: 275 x 175 x 130 mm
Electrical power input: 24 VDC - 1A
CO2 input: 1 - 5 Bar (15 - 70 PSI)
Extraction: Diameter 22 standard hose
Instruction manual CO2 Easy Box System for Euthanasia
| co2_easy_box_system_english_version.pdf |
| co2_easy_box_system_german_version.pdf |